DLB-600W 200V 40A DC Electronic Load Tes Kapasitas Baterai

User manual and APP Download

File Download Way and 600W（200V & 3mA~/40A）
1, User manual, PC software installation instruction and PC software and Android APP download link : https://www.mediafire.com/folder/wnfpdnqfxscj2/DLB600W
2, IOS APP: search E_test on iphone APP store to download
3. Android APP: https://www.mediafire.com/file/0jiio43c0vuu1wx/U_Meter-Phone_mobile.apk/file
4, 600W(V*A

–Product Parameter–

Electrical parameters
Test voltage：2~200V
Working current：0.2~40A
DL24-M Discharge power: voltage * current < 150 W
(The actual running current is limited by the maximum power, please adjust the current according to the law of energy conservation)
The built-in over-current, over-temperature, over-power safety protection functions, if the protection interface is popped up, please pay attention to the parameter adjustment, shall adjust to the maximum power, and then discharge, you can first slowly and smoothly adjust the preset value in the start and discharge, in order to adjust up to the maximum power for discharging

Note: The discharge current is limited by the maximum power, less than 3A above 200V, and less than 40A at 15V.

(1):
1.1 Battery capacity test
The tester is designed for the discharge of various batteries,18650 battery,car battery including NiMH, NiCd, LiPo, LiFe and Pb, as well as capacity testing.
1.2 Mobile power test
This tester supports discharging of mobile power supply and capacity test.
1.3 Power performance test
The tester supports performance and aging tests of various DC power supplies.
(2):
2.1 Power supply: DC 12V/2A
2.2 Voltage range: 0-200.00V, step 0.01V
2.3 Current range: 0.010-40.00A, step 0.01A (the current is automatically adjusted according to the power limit)
2.4 Discharge method:
CC: Constant current discharge of the battery, which supports testing of battery capacity or power supply current.
CP: Discharge the battery with constant power for use or test power such as constant power equipment.
2.5 Discharge power:600W
2.6 Four wires: voltage and current channels are separated, with high test accuracy
2.7 IPS display: voltage, current, time, capacity, power, electric energy, etc.
2.8 PC connection: The tester can be connected to the computer through Bluetooth to achieve more functions, such as graphics, calibration, firmware upgrades, and test cycles.

Through testing various DC power adapters

Play and measure the current, voltage, power and other parameters of various DC power adapters
Use the DC power supply to connect the DC independent power supply port of the load meter, and then use the “Settings” button to connect as shown in the figure below.
Precisely adjust the current to test the voltage and rated current of the power supply
The DC power supply can also be aged for a long time, with strong functions, simple operation, convenient and quick testing

Intelligent one-key full automatic detection of DC power supply

PT mode of charger current power performance
Press and hold the M button in the menu until the mode bar flashes, wait a while after pressing the ten-key PT mode
Automatically enter the DC power supply/charger auto-detector mode, then plug in your tested power supply and
Charger, then short press the start button, it will automatically start to run for a period of time and then report
Displays 4 kinds of important numerical results, making complicated tests instantly simplified, accurate, and easy to use