Deskripsi
4 strings of 12.8V 14.8V inverter with high current of 100A, 4 strings of 3.2V lithium iron phosphate battery protection board, 4 strings of 3.7V lithium battery protection board with balanced charging.
The products sold in this store contain a little electronic technology. If you do not understand or are not sure whether it is suitable for your product, please consult customer service first. Please understand the parameters we describe on the page in detail before purchasing, so as to avoid unnecessary trouble. . Thanks! (Beginners shoot carefully)
There are Chinese and English labels.
Note on point T: Adding a normally closed temperature sensor switch can expand the temperature protection effect, and the 0R resistor next to the solder joint should be removed.
Note: For products with a current above 3A, the battery discharge rate should be above 3C.
Rate calculation formula: 1C rate battery, 2000 capacity is equal to 2AH*1=2A working current.
3C rate battery, 2000 capacity is equal to 2AH*3=6A working current.
In use, the battery will heat up, that is, the battery rate is not applicable. In this case, it cannot be used for a long time, and the battery will be damaged quickly.
There are 10 MOS tubes, strong heat dissipation aluminum sheets, and the upper limit of continuous current is 100A. It is suitable for 4 strings of battery packs such as inverters, xenon lamps, and solar street lamps.
There are 10 MOS tubes, strong heat dissipation aluminum sheet, continuous current up to 100A. Suitable for inverters, xenon lamps, and other 4-series iron-lithium battery protection
